Products Guide|Technical Guide|Fluid Guide

Valves and Brass Fitting

Home >
  • Valves and Brass Fitting
    • >
  • Valves and Strainers
    • >
  • Check valves
    • Show highlighted itemsView items list
    «1 2 3 4»
    Number of products per page
    Comply with EN 13959 and NF 045 DT.6 stadards.
    Pressure : PN 10 bar
    Temperatures : 0-90°C
    Connection : Thread F/F ISO 228-1
    Drain : G 1/4"
    Certification : NF - ACS
    Material : CW617N brass body, NBR seal, plastic plug, polymer disc
    Close the window
    Comply with EN 13959 and NF 045 DT.6 stadards.
    Pressure : PN 10 bar
    Temperatures : 0-90°C
    Connection : Thread F/F ISO 228-1
    Drain : G 1/8"
    Certification : NF - ACS
    Material : CW617N brass body, NBR seal, plastic plug, polymer disc
    Close the window
    Comply with EN 13959 and NF 045 DT.6 stadards.
    Pressure : PN 10 bar
    Temperatures : 0-90°C
    Connection : Thread F/F ISO 228-1
    Drain : G 1/4"
    Certification : NF - ACS
    Material : CW617N brass body, NBR seal, plastic plug, polymer disc
    Close the window
    • Body : Brass CW 617 N
    • Spring : Stainless steel - AISI 302
    • Airhole plugs : Brass CW 614N
    • Delivered with 2 anti-pollution brass drain plug

    Thread Female/Female : ISO 228-1

    • Maximum working temperature : -20°C +100°C : water
    -20°C +150°C : hydrocarbons, comprimed air

    • Ideal for hot/cold water, different oils and compressed air
    • Suitable for industrial, pneumatic and hydraulic installations
    • It can be fitted in horizontal, vertical or oblique position.

    Close the window
    • Valve Body CW 617N
    • Exagonal Cap CW 617N
    • Exagonal Cap washers fibre
    • Inspection small cap CW 614N
    • Inspection small cap washer fibre
    • Seat brass CW 617N (with NBR 60 SH/A for rubber seat valve)

    • Working temperature
    - minimum : -10°C
    - maximum  : 100°C

    Certifications : ACS

    • Thread : ISO228 
    Close the window
    • Valve Body CW 617N
    • Exagonal Cap CW 617N
    • Exagonal Cap washers fibre
    • Inspection small cap CW 614N
    • Inspection small cap washer fibre
    • NBR Seal

    • Working temperature
    - minimum : -10°C
    - maximum  : +90°C

    • Thread : ISO228-1

    Certification ACS
    Close the window
    • Body in bronze CC491K
    • Thread : Female/Female ISO 228-1
    • Seals in NBR

    • Working temperature
    - minimum : 0°C
    - maximum  : 95°C

    • The valve is ideal for sanitary and pneumatic plants for one direction flow. It is ideal for pumps and autoclaves.
    • It can be fitted in horizontal or vertical
    Close the window
    • Body in bronze CC491K
    • Components in hot pressed brass and from bar CW 617 N UNI-EN 12165
    • Seals in NBR

    • Working temperature
    - minimum : 0°C
    - maximum  : 95°C

    • The valve is ideal for sanitary and pneumatic plants for one direction flow. It is ideal for pumps and autoclaves.
    • It can be fitted in horizontal or vertical
    Close the window
    • Body and tap in stainless steel
    • Stainless steel AISI 316 seat
    • Tap seal PTFE

    • Working temperature
    - minimum : -10°C
    - maximum  : 120°C

    Thread : Female/Female : ISO 228-1
    PN16 à 20°C
    Close the window
    Show highlighted itemsView items list
    «1 2 3 4»
    Number of products per page