Products Guide|Technical Guide|Fluid Guide

Valves and Brass Fitting

Home >
  • Valves and Brass Fitting

    • 2304 - K10 PULSE EMITER FOR WATERMETER REF 1532

    Reed switch type emitter K10

    1 pulse each 10 litres.

    Cable length : 3 m
    Contact type : normally open
    Position : central
    Max. power : 3 W
    Max. voltage : 28 V-DC
    Max. current : 0,11 A
    Max. contact resistance : 200 mΩ
    Max. contact capacity : 0,2 pF
    Insulation resistance : 1010 Ω
    Max. frequency : 0.5 kHz
    Min. insulation rupture voltage : 200 V
    K10 PULSE EMITER FOR WATERMETER REF 1532
    K10 PULSE EMITER FOR WATERMETER REF 1532

    Regulations for drinking water consumption in France - 4MS approach

    Initiated by 4 countries (France, Germany, Netherlands and Great Britain) the 4MS common approach aims to standardise the certification rules for materials and products in contact with drinking water. Its principles lay the foundations for a future single European régulations.


    France introduces a part of this approach into its regulations with the new decree of 25 Juin 2020. It is effective from December 2020. Metallic materials in contact with drinking water must comply with the 4MS approved list. French drinking water certificates (ACS) issued before the new regulation, will remain valid until their expiry date, providing that metallic materials comply with the new decree from January 1st, 2023.

    CODITAL is fully committed to this approach and productions has been renewed in compliance with the 4MS rules.


     


    Compressing fittings: Series 7000
    > Te female connector
    > Long socket
    > Water-meter ball valve    		 Ball Valve : Serie Industry
    > 2 pieces ball valve
    > Split Body
    > 3 ways ball valve
    > Wafer    		 Measurement and control
    > Tap-withmanometer
    > Water-meter
    > Manometer